Special adhesion promoter PROFHOME 300-22-10 primer for interior walls and heavyweight wallpaper white 125 ltr for max 830 - 1040 sqm
| Article no. | 300-22-10 |
| Manufacturer | e-Delux GmbH |
| Ready for dispatch within approx.. | 5-7 days after payment |
| Article no. | 300-22-10 |
| Basic colour | white |
| Collection | Profhome |
| Consumption | approx. 120 - 150 ml/m2 |
| Coverage | approx. 830 - 1040 m2 |
| Height (mm) | 1100 |
| Length (mm) | 1200 |
| Manufacturer | e-Delux GmbH |
| Manufacturing country / region | Germany |
| Model no. | PROFHOME | 300-22-10 |
| Number of pieces | 1 |
| Product type | Primer |
| Product type | Adhesion promoter |
| Specifications | white pigmented, good coverage, emission and solvent free, excellent adhesion for wallpaper and non woven glue |
| Suitable for | indoors |
| Volume | 125 l |
| Volume (ml) | 130 |
| Weight (g) | 200000 |
| Brand | Profhome |
| Width (mm) | 800 |
| Significant properties | enhances the adhesion for following coatings, excellent adhesion for wallpaper and non-woven pastes, corrects colour tone differences of the surface, base coating for dispersion paints, may also be used as adhesion promoter and primer for exterior walls |
White adhesion promoter for non-woven wall liner and heavy-weight wallpaper | special primer for interior walls
Ready for use, white-pigmented adhesion promoter for pre-treating surfaces to enhance their adhesion for following coatings. PROFHOME® adhesion promoter is a professional priming paint without texture and helps to provide optimum adhesion for wallpaper pastes, non-woven and fiber pastes and paint coating on wall and ceiling surfaces. Obtain a perfect bonding for heavy-weight wall coverings like renovation wall liner, textile or glass fiber wall coverings and glass fibre wallpaper. Moreover it corrects the surface's colour tone differences. Free from harmful emissions, solvent- and plasticiser-free, environmentally friendly.
Application rate: approx. 120-150 ml/m2 depending on the absorptivity of the underground material. 125 litres are sufficient for approx. 830 - 1040 m2. Recommended to test the individual absorptivity in advance.
The surface to be treated shall be smooth, clean, dry, absorptive and stable. Repair fissures and gaps with filler. Remove unevennesses.
Application: coat with brush, paint-brush, roller, spraying devices or airless painting devices. In case of very absorbent underground material it is strongly recommended to treat the surface in advance with an adequate primer.
Temperature for application: minimum + 5°C air and surface temperature during application and drying time. Drying time (normal atmospheric humidity) approx. 12 to max. 24 hours. Then the surface is dry and ready to hang wallpaper. Clean the working equipment with water after use.
Significant properties:
- enhances the adhesion for following coatings
- excellent adhesion for wallpaper and non-woven pastes
- corrects colour tone differences of the surface
- base coating for dispersion paints
- may also be used as adhesion promoter and primer for exterior walls
EU threshold for this product cat. A/h: 30g/l (2010). This product contains maximum 1 g/l VOC. Ingredients according to VdL RL01 (German Association of Lacquer and Paint Industry directive): special binding agent, white pigment, calcium carbonate, water, additives.
Manufactured by: e-Delux GmbH
Collection: PROFHOME® Adhesion promoter
Perfect to enhance the adhesive capacity for pastes, adhesives and paints
One bucket of 125 l is sufficient for approx. 830 - 1040 m2 | Application rate: approx. 120-150 g/m2
Special primer for interior and exterior use - quality Made in Germany
RESPONSIBLE ENTITY IN THE EU
e-Delux GmbH
Röntgenstr. 8
40699 Erkrath
Germany
E-mail: igor.kraftsoff@e-delux.de
Phone: 0049 21048331122
OTHER PRODUCTS IN THIS SERIES
